Skip to content

5 of the best floor standing speakers under $750

Floorstanding speakers are a thing for both music and movies. It is large compared to bookshelf speakers. They are large and go loud compared to bookshelf speakers. They are not just loud but go deep in bass as well. Today we are going to see the 7 best floorstanding speakers under $750.

best floor standing speakers under $75
best floor standing speakers under $750

Let’s go

Q Acoustics 3050i

Q acoustics make awesome speakers. They punch above its weight. It also looks good. Q Acoustics is one of the finest speakers in the market and is one of the best floorstanding speakers under $750.

It is a dual woofer single tweeter design and is in MTM configuration. It means that the speakers are arranged in a way that the tweeter is found between the speakers.

It is a 2-way speaker. The enclosure type is bass-reflex ported. Hence the bass is nice

The speaker can produce 44 Hz – 30 kHz of sound frequencies at +3 dB, -6 dB.

build quality

The build quality is awesome in this speaker. It is made of a proper MDF cabinet with a wood Vineer covering the cabinet. The speakers are available to you in four colors. White, black, grey, and wood grain.

The average impedance is 6 Ohm while the lowest impedance is 4 ohms. The speakers are highly sensitive where the Sensitivity is 91 dB (2.83 V@1 m). This makes the speakers can be mated with a variety of amplifiers. You would need an amplifier that produces 25 – 100 W to drive these speakers.

 The crossover frequency is set at 2.5 Hz. This is an ideal place between the woofers and tweeters. The speaker weighs 17.8 kg each and the cabinet volume is 32.4 liters. It uses Point-to-Point braces to prevent cabinet vibrations. The tweeter is decoupled from the speaker cabinet means the tweeter can produce sound independently and will not be affected by the woofer’s sound

Sound quality

The sound quality is very good in this speaker. Even the bookshelves excel in sound quality. The difference is this speaker goes deeper and louder compared to bookshelves. The dynamics are great and it hits hard for a speaker with pair of 6.5-inch woofers. The sound stage is deep and wide.


The bass is beautiful. It hits hard for a pair of 6.5-inch woofers. The lowest it can go is below 44 Hz but the midbass is punchy and tight. The basslines in songs have good textures. Hence, don’t get fooled by the specifications.


The mids are well-balanced and strong. They are sweet as well. The speaker is a midrange king and you can play genres like jazz, classical all day long. With these great mids, the soundstage is clear too. Since the speakers have great mids, the vocals sound amazing and sweet. You can’t go wrong with this speaker.


There is no harshness in the tweeter. The treble is smooth and not piercing. It has a warm signature. Play a rock song and you don’t have to turn the volume down. There is no listening fatigue with this pair.

  • Great sound quality

  • Punchy bass

  • Sweet mids and highs

  • Good build quality

  • Nothing in its price range.
Enclosure type:2-way bass-reflex
Bass Unit2 x 165 mm ( 6.5 in)
Mid unitNone
Treble Unit22 mm (0.9 in)
Frequency Response44 Hz – 30 kHz
Average Impedance6 Ohm
Sensitivity (2.83 V@1 m)91 dB
recommended  power25 – 100 W
Check the Price on Amazon

ELAC Debut 2.0 F6.2

This floorstander will cost you a tad more than $750. But the spending is worth it. It is also available for under $750 sometimes.  This is a speaker designed by the famous designer Andrew Jones. He makes costly speakers and Elac made him make a great sounding speaker at nominal cost. Hence, it is one of the best floorstanding speakers for under $750.

It looks great and made really well. It is a 3-way speaker. It can be used for both music and movies. It is such a convenient pair of speakers. It has a nominal impedance of 6 ohms. It is the flagship of the debut 2.0 series and also has matching speakers for a home theatre setup.

The sensitivity of these speakers is low at 87db @2.83v/1m. With the 6-ohm nominal impedance, you would need a beefy amplifier to bring out the full potential of these speakers.

The crossover frequency is set at 90Hz and 2200Hz.

Build quality

It uses a Triple 6-1/2″ Aramid Fiber speaker for bass and midrange driver. One 6.5 inch driver acts as a midrange driver and the remaining two 6.5 inch drivers act as bass drivers. It is adjoined by a capable tweeter for high frequencies. It is a one-inch cloth dome tweeter. It produces a nice treble.

The speaker comes in only one color and that is Black Ash Vinyl. It looks absolutely stunning in this setup.

Hence the product is well made and the build quality is superb. There is a flared port responsible for additional bass. Overall, it is a nice speaker to own provided you have a nice amp to power these.

Sound quality

The sound quality is fantastic and it rivels many expensive speakers under or even more than $1000. The instrument sounds real and the overall sound signature is warm. 


It hits hard. With a flared port, it’s even better. There are dedicated drivers for bass and the two 6.5 inch drivers do the job. The lowest it can go is 39 Hz +/- 3db and this is enough for most music. If you want more bass, you can always add a subwoofer. But the speaker as such is self-sufficient.


There is a dedicated mid-range driver for mid-range duties. The driver is again a 6.5-inch cone. This gives great authority to the sound. It sounds large and hits hard. It is not a thin-sounding expensive speaker around but has a proper midrange.


There is a 1-inch cloth dome tweeter for high-frequency duties. It is not an ear-piercing tweeter but a soft, smooth warm sounding one. You will not get fatigued from using this speaker thanks to the tweeter. The highs are crisp but not sharp. I loved the sound.

The soundstage is expansive and the imaging is good. Not as good as coaxial speakers but the image is very good.

  • Great sounding

  • Good bass

  • Warm sounding

  • Good build

  • Needs a powerful amp.

Enclosure type:3- Way Bass Reflex
Bass UnitDual 6-1/2″ Aramid Fiber
Mid unit6-1/2″ Aramid Fiber
Treble Unit1″ Cloth Dome
Frequency Response39Hz – 35000Hz
Average Impedance6 Ohms
Sensitivity (2.83 V@1 m)87db
recommended  power140 Watts Max
Check the Price on Amazon

Fluance Reference

Fluence Reference is a great floor stander with a built-in subwoofer. The reference series consist of a bookshelf speaker, this floor stander, and a 5.1 package. All the speakers are designed well. It is a 3-way floorstanding speaker with 4 drivers in each cabinet.

It can handle the power of 80 – 160 watts RMS.

Build quality

The build quality is nice that it will last for a long time. It has internal bracings and this not only increases the structural rigidity of the speaker but also doesn’t allow much resonance inside the cabinet. Dual rear ports provide controlled bass

Sound quality

Why should you buy this speaker? It is because of its sonic performance. It has a flat sound means you can play a variety of songs on it. The frequency response of this speaker is 35 Hz to 25,000 Hz. It can hit really hard and it has extended treble as well. The sensitivity however is less at 87dB @ 1W / 1m. You would need a powerful amplifier to drive this thing.

The crossover frequency is fixed at 100/3000 Hz. This makes the speakers supremely versatile.


The bass in this speaker is so strong. It hits 35 Hz easily. It has an 8-inch subwoofer at the bottom of the cabinet. This ensures great bass from the system. The bass is articulate and tactile. The bass doesn’t interfere with the mid and high frequencies. Since the subwoofer is on the lower side, placement can be hard also, the ports are on the back and are careful with placements.


The mids are great with Dual 6.5 inch woofers. The woofers are Woven fiberglass Composite Drivers. The surrounds of the speakers are made of Butyl Rubber. This will enhance the longevity of the woofer. Dual 6.5 inches for mids means the mids will sound authoritative and sweet. The midbass is also very good.


The highs are sweet and not shrill. It uses a 1-inch Neodymium-based Balanced Silk Dome tweeter that is Ferrofluid Cooled. This not only sounds nice but also increases the life span of the speakers. Overall, it is a nice tweeter to listen to.

  • Built-in Subwoofer

  • Dual 6.5-inch mid driver

  • Great build quality

  • Quality tweeter

  • Poor sensitivity

Enclosure type:3 Way bass reflex
Bass Unit8 inch Polymer Treated
Mid unitDual 6.5 inch
Treble Unit1 inch Neodymium Balanced Silk Dome
Frequency Response35Hz – 25KHz
Average Impedance8 Ohm Compatible
Sensitivity (2.83 V@1 m)87dB
recommended  power80 – 160 Watts RMS
Check the Price on Amazon

Wharfedale – Diamond 240

Wharfedale is a British speaker-making company that has a legacy of decades. Diamond is one of their best-selling speakers and Diamond 240 is a pure value for money speaker. Hence it is under the list of best floorstanding speakers under $750. These speakers are first marketed in 1982 and ever since then, there is no turning back. It won numerous awards along the way.

Build quality

The build quality is like European speaker brands. Strong and tight. The speaker has internal bracing to avoid body resonance. This eliminates the boxy sound. The cabinet volume is 10.6 Litres and it weighs 21.6 Kg per piece. Overall, the build is very good

Sound quality.

The reason why it has got so many awards is for its impeccable sound quality. For the price it is fantastic. It has taken a cue from its elder brother, the Jade series. The sensitivity is 89 dB. However, the nominal impedance is 4 ohms and the minimum impedance is 3 ohms. Hence the recommended amplifier is 25 to 150 watts. The Peak spl is 102dB. The frequency response of this speaker is 40Hz – 20kHz. It hits low and can go up to 20KHz which is a good thing. You will need a powerful amplifier to bring the full potential of this speaker out.


The bass is great in this speaker. The Bass extension is 35Hz. It is more than enough for most music genres. You will enjoy the bass. The bass driver is a couple of 165mm Woven Kevlar Cone drivers. The crossover is set at 470Hz and hence the bass is fantastic. The textures of the instruments are preserved and put out in a more soothing way.

It uses an aperiodic bass-loading system which lets you keep the speaker close to the wall.


The mids are life-like. It is so soothing and has a great grip. The mid-bass is taut and sounds fantastic. It uses a 1/4” Kevlar Midrange woofer to produce the Mids. And it works. The crossover is set at 2.7kHz. The transition of mids to treble is so smooth


The sound signature of this speaker is warm and the treble compliments that. The speaker uses a Soft-Dome Tweeter of 1-inch size for the treble duty and it works really well. It is reasonably sparky but not harsh in any way. It is not sharp as well. Hence you will get fatigue-free listening. You can listen to this for hours.

  • Great sound

  • Warm sound

  • Fatigue free listening

  • Sound quality

  • Need a powerful amp.

Enclosure type:3-way floorstanding speaker
Bass Unit165mm Woven Kevlar Cone x 2
Mid unit130mm Woven Kevlar Cone
Treble Unit25mm Soft Dome
Frequency Response40Hz – 20kHz
Average Impedance
Sensitivity (2.83 V@1 m)89dB
recommended  power25-150W
Check the Price on Amazon

Polk Signature Elite ES60

Polk is a nice American brand that makes great speakers for home and automobile needs. Polk signature is a series from Polk audio and it serves home theatre needs. The Elite ES60 is one such speaker that works exceptionally well with movies

Build quality

As always Polk speakers are built well. It is no different compared to other Polk speakers. It has sharp edges and curves and it looks beautiful. The speakers look bold and modern at the same time sophisticated as well. It can easily mingle with home decor. It comes in three colors, walnut, black and white.

Sound quality

Why should you buy this speaker? It is because of the sound quality. The sound quality is paramount in this Polk Signature Elite ES60. Hence, it is one of the best floorstanding speakers under $750. Every bullet feels real. The surround sound makes the action happen in your room. The speaker can go loud without distortion. It is a highly sensitive speaker and that makes it better of the bunch. The sensitivity is 90 dB. The nominal impedance is 8 ohms. The frequency response is 32-40,000 Hz. Normal AVRs can drive the speakers well.


Bass is one of the best things about this speaker. It uses 3 6.5 inch woofers to produce awesome sound. It is a 2.5-way speaker. Polk audio has Power Port Technology that makes the bass sound 3 dB more than other speakers and that makes the bass so powerful but it doesn’t meddle with the vocals.


The midrange is beautiful. The vocals sound realistic. Since the vocals are coming from the 6.5-inch woofer, the sound has plenty of authority. The vocals feel crisp and clean. The sound from the mid-range part of the movie is felt so real.


The treble is a bit sharp to my liking. It has a great sense of clarity. Each scene in the movie is felt beautifully. It sounds crisp and detailed.

  • Bassy sound

  • Looks beautiful

  • 90 dB sensitivity

  • 8-ohm nominal impedance

  • The treble can be harsh for some.
Enclosure type:2 way bass reflex
Bass Unit6.5″ 
Mid unitNone
Treble Unit 1” Terylene High-Res Dome Tweeter
Frequency Response36 Hz → 40,000 Hz
Average ImpedanceCompatible with 4 and 8 ohm outputs
Sensitivity (2.83 V@1 m)90 dB
recommended  power20 watts → 300 watts
Check the Price on Amazon


The above-mentioned speakers are the best floorstanding speakers under $750. Some of the speakers punch above their weight and some have good movie characteristics. For music, I would prefer ELAC Debut 2.0 F6.2 or Wharfedale – Diamond 240. For movies, I would prefer Klipsch RP-280F or Polk Signature Elite ES60. As an allrounder, I prefer Q Acoustics 3050. Thanks for reading

Vignesh sathiaraj

Aju Vignesh Sathiaraj Padma is a mechanical and audio engineer. He is a person who loves technology and things. He is also an audiophile and loves to listen to audio gears. He is an avid writer and loves to blog.

Leave a Reply

Your email address will not be published. Required fields are marked *