Skip to content

Best bookshelf speakers for under $750

A picture of a bookshelf speaker

Small bookshelf speakers create great sound. They are small and take only a small space. But modern bookshelf speakers produce a loud and full sound. Some bookshelf doesn’t really need a companion subwoofer as well. They produce decent bottom end too. Today we are going to see the best bookshelf speakers for under $750. Let’s dive in.

A picture of a bookshelf speaker

Looking for the best floor standing speakers for under $750 as well? We have the guide for you.

Note: The below listing is not in any order. All the speakers mentioned are best in class in one way or another

KEF Q350 – one of the best bookshelf speakers for under $750

KEF is one of the highly regarded audiophile brands in the world. Their LS 50 is one of my all-time favorites. It sounds nice and has a very good wow factor for a small speaker. Ef Q350, however not in the league of LS 50, is still a great speaker to listen to songs.

The speaker is a successor of KEF Q 300. Gone are the front port and chrome strip. The design is changed for sonic benefits. The speaker cone takes the center image.

The main engineering design in this speaker is that the tweeter is mounted onto the center of the main speakers. It has a couple of benefits. 

It time aligns the sound properly that the speaker has a wide sweet spot. Since the tweeter is placed in the middle of the cone, it acts as a point source. Point source means the sound is arriving from a point. This gives razor-sharp imaging. The center image will be a treat to listen to.

Build Quality

The speaker is well built. The speaker comes in three colors. White, black, and walnut. The white cabinet has a speaker with black surrounds on the half-white cone. The black color cabinet has everything black. The walnut color has the cabinet in walnut color and the cone is black. Irrespective of the color, the speakers look good. 

You will also see it is rear ported. Hence you need to give some space at the back of the speaker for good performance. The grill slaps magnetically.

Sound quality

The sound quality is very good. The bass is rich and has the needed amount. It is not a chest hitting bassy but not lacking either. When I played the ‘believer’ song on it, it sounds great. It had decent bass for that song. The bass extension is 42Hz at -6 dB. The speaker has a frequency response of 63Hz – 28kHz at +/- 3 dB. That’s a decent amount of bass

The mids are beautiful. Since the system has coaxial drivers, the mid sounds are open and neat. 

The cross over freuency is 2.5kHz. But, it is barely identifiable. The sound crosses over smoothly.

The treble is very good as well. It is not a warm speaker but a sweet-sounding neutral speaker. They sound crisp. They are not bright though. 

The tweeter is the damped form behind to give good sound quality. The overall sound quality is great. It puts out very good details and oomph

Overall, for the price, it is a great speaker to own. Hence it is one of the best bookshelf speakers for under $750.

Specs

Specifications
Enclosure type2-way bass-reflex
Impedance8Ω (min.3.7Ω)
Frequency response (±3dB)63Hz – 28kHz
Frequency extension (-6dB)42Hz
Sensitivity (2.83V/1m)87dB
Recommended power15-120W
Bass driver165mm (6.50in.) aluminium Uni-Q
Mid Driver
Treble driver25mm (1in.) vented aluminum dome
Weight7.6kg (16.8 lbs)
Pros
  • Co-axial driver
  • Good bass
  • Great imaging
  • Wide soundstage
  • Modern looking
Cons
  • Nothing in this price range.
Check the price on Amazon

ELAC Uni-Fi 2.0 UB52

ELAC Uni-Fi 2.0 UB52
Build quality

The speaker consists of three drivers. A tweeter, a midrange, and a bass driver. The system has a 1-inch soft-dome tweeter. The midrange is a 4-inch aluminum cone speaker. The tweeter and the midrange are coaxially mounted. The bass driver is provided below the coaxial speakers. It is a 5.25-inch aluminum cone driver. Three cohesively work for a better-sounding speaker. 

The tweeter takes care of the sound above 2000 Hz. The mid takes care of the sound between 200 Hz and 2000 Hz. The bass driver takes care of the sound below 200 Hz. The speaker port is on the front side. You can keep the speaker close to the wall and you will unlikely get and boundary effect excitation. 

It comes in only one finish, Black ash vinyl. The enclosure is made of thick MDF sheets and has internal bracing to give stiffness and thus it doesn’t add coloration to the sound.

Sound Quality

The sound quality is the reason why you should buy this speaker. The sound is just fantastic. The speaker has a frequency response between 46 and 35,000 Hz. This is possible only with the three-way design.

The sensitivity of this speaker is 85 dB at 2.83 v/1m. The nominal impedance is 6 Ohms. Hence you would need a powerful amplifier to drive these. It is stated that the speaker requires an amplifier that can do between 40 and 140 Watts per channel. The peak power handling is 140 WPC.

The sound quality though is very good. Power it with the right amplifier and you will be taken to the audio heaven.

The bass is at the right amount. It is not exaggerated. It is not low either. Be prepared not to expect a chest hitting bass. The 5.25-inch driver does its job.

The mid is sweet and has full of textures. The details are breathtaking. The sound is clear. The dynamics are great and are better compared to its old generation. The treble is sparkly and has good dynamics. The sound is not sharp but clean sound. It is totally different from the old speakers.

The soundstage is beautiful and wide. The center image is perfect. You can pinpoint the instruments in the sound stage. The soundstage itself is 3d like. The sweet spot is also great. It is easy to find a perfect seating position to listen to this speaker. For what it offers, it is one of the best bookshelf speakers for under $750.

Specifications
Enclosure type3-way speakers
Impedance
Frequency response (±3dB)46 to 35,000 Hz
Frequency extension (-6dB)
Sensitivity (2.83V/1m)85 dB
Recommended power40 to 140 WPC
Bass driver5.25-inch aluminum cone
Mid Driver4-inch aluminum cone
Treble driver1-inch soft-dome
Weight
Pros
  • Sound stage
  • Imaging
  • Clarity
  • Scale
  • Bass
Cons
  • Nothing much.
Check the price on Amazon

Q Acoustics Concept 20 

We loved the Qacoustics 3020i very much and there is no surprise that the concept 20 sounds darn nice. It is easily one of the best bookshelf speakers for under $750. It is easily one of the best on the list. It looks absolutely gorgeous as well.

Build quality.

Take it on your hands and you will know how nice the speakers are built. The build quality is top-notch. It comes in two colors, black and white. It is a two-way bass reflex speaker. It is built with ‘GelcoreTM Construction’ so that the sonic performance is top-notch. With this technology, the cabinet will have only ultra-low resonance.

The outside of the speaker looks glossy white/black. The package comes with Speaker Grills and Port Bungs. It is quite gorgeous to see the speaker. It is sleek and modern. It weighs 5.6kg. It is sold in pairs. Rubber feet are included in the package which is a nice thing.

Sound Quality

The sound quality is why you should buy this speaker. The sound is out of the world. The bass driver is a 125mm woofer and the Treble driver is a 25mm tweeter. Those woofer and tweeter are just enough to produce awesome sound. The frequency response is 64Hz – 22kHz. Don’t worry. It has a good low end in real life.

The nominal impedance is 6ohm. It dips to 4 ohms while working. The sensitivity is 88dB. You will need a powerful amplifier to drive this speaker to the fullest. The recommended amplifier is 25 – 75w in power. The crossover frequency is set at 2.9kHz. The cross-over is smooth which is a testimony for this speaker.

You will get decent bass with this speaker. The bass is satisfying but if you’re more enthusiastic with the bass, you should add a subwoofer or should consider getting a floor-standing speaker like Qacoustics Concept 40. 

The mids are very very good. They are clean and dynamic. The voice sounds so smooth and real. The instruments felt fantastic. The speaker is a warm-sounding speaker and therefore the treble is slightly rolled off. The mids and trebles are full of details although the treble is rolled off a bit. This makes the speaker a wonderful companion for hours-long of music listening sessions.

Specifications
Enclosure type2-way speaker
Impedance
Frequency response (±3dB) 64Hz – 22kHz
Frequency extension (-6dB)
Sensitivity (2.83V/1m)88dB
Recommended power25 – 75w
Bass driver125mm
Mid Driver
Treble driver25mm
Weight5.6kg
Pros
  • Great sound quality
  • Beautiful design
  • Warm sound
  • Good dynamics
Cons
  • Nothing
Check the price on Amazon

Dynaudio emit M10 

Dynaudio emits M10  is one of the compact speakers around. But, don’t get fooled by its little size. It has a huge scale of sound inside it. Dynaudio makes awesome speakers and their Emit m20 is one of the favorites among audiophiles. Emit m10 is not bad either. It makes one of the best speakers for under $750.

Build quality

The build quality is awesome. The MDF used is thick and has less resonance. Therefore it doesn’t sound boxy. The cabinet has the necessary internal bracings to make it sound right. The speaker weighs 5.6kg. Hence it is sure that the speaker is built well. The speaker has a 14cm woofer which is a long-throw woofer. It is coupled with a 28 mm soft dome tweeter that gives brilliant upper-frequency sound. 

Sound quality

This little wonder has a fantastic sound quality. The soundstage is necessarily wide and deep. The sweet spot is great too. This loudspeaker is made for a small to medium-sized room. What sets this speaker apart is its impressive dynamics and scale for a small set of speakers.

The bass is solid. The kick drum hits with a solid thwack. The explosive bass is amazing. It hits hard for a bookshelf speaker and the sound it produces has good authority and scale.

The mids sound is razor-sharp and clean. Throw them a piece of complex music and the speaker will ace it well. The Emit m10 sound is open and very fun-filled. You will enjoy music through this little speaker

The treble is sweet and crisp. It is not overdone. The treble sounds neat and detailed without much harshness. The speaker sounds absolutely fantastic for the money and it is easy to recommend. 

The speaker is 86dB sensitive. The sensitivity is quite low and warrants a powerful amplifier. In addition to that, the speaker has a nominal impedance of 6 Ohms. The recommended amplifier watts are 150. The frequency response is 50Hz – 23kHz. 50 Hz is in the subwoofer territory. It is a Bass Reflex Rear Ported and has to be careful with the placement near the wall. The crossover is set at 1800Hz. The crossing over is seamless.

Specifications
Enclosure type2-way bass-reflex speaker
Impedance
Frequency response (±3dB)50Hz – 23kHz.
Frequency extension (-6dB)
Sensitivity (2.83V/1m)86dB
Recommended power150 W
Bass driver14 cm
Mid Driver
Treble driver28 mm
Weight5.6kg
Pros
  • Sound quality
  • Good bass
  • Build quality
  • Dynamics
  • Clean sounding
Cons
  • Wish the sensitivity is higher.
Check the price on Amazon

Klipsch RP-600M

Klipsch is known to make nice home theatre speakers. Klipsch RP-600M is no exception. They also are highly efficient speakers. It’s easy to power. 

Build quality

The build is very good. The construction is solid and it looks premium too. The speakers come in three different colors. Walnut, ebony, and piano black are the colors. The walnut feels nice and special. 

There are two binding posts available. This way, you can bi-wire or bi-amp the speakers. The grills are available and they are magnetic. The speakers are sold in pairs. There is a Tractrix horn on the tweeter and one on the back of the speakers. With a 6.5 inch woofer, this is a large bookshelf speaker. The enclosure is made of MDF. This is a bass-reflex speaker. 

It weighs 16 lb (7.3 kg). Rubber feet are provided for better isolation from the surface. The walnut and ebony are kinds of scratch-resistant finishes. The black color is hand-sanded to perfection. It is glossy and looks beautiful.

Sound quality.

The sound quality is excellent with these speakers. The speaker can take in some serious power and sounds very good. It has a frequency response of 45-25kHz +/- 3dB. It is a great achievement for a bookshelf speaker to go this low. The sensitivity of this speaker is also very good. 96dB @ 2.83V / 1m is the reading. The nominal impedance is 8 ohms. You can use any amplifier to drive this speaker. 

Speaking of the amplifier, it can take in a continuous power of 100 watts and a peak power of 400 watts. This means the speaker exudes great dynamics. The dynamics are responsible for the fantastic movie-watching experience. The crossover is set at 1500 Hz. It has an almost flat frequency response. It is one of the best bookshelf speakers for under $750.

The bass is great for bookshelf speakers. The bass driver is a 6.5-inch woofer. The speaker cone is a spun copper cone. It is high in rigidity and very light in weight. This is one of the reasons for the dynamic sound it puts out. The bass is very tight and goes low. As said earlier, the bass extension of 45 Hz at +/- 3db is quite low for a bookshelf speaker. The cabinet has a Tractrix port. It improves bass response and reduces port noise.

The mids are also great. The fact that the crossover frequency is crossed at 1500 Hz means a lot. The dialogues are clear. It can even be used as a stereo pair for listening to music apart from being used as a home theatre speaker. The 6.5-inch cone produces the low mids and mid-bass with great authority. Hence, male vocals sound extraordinary.

The tweeter is special in this speaker. The tweeter is mounted in a horn. Yes, it is a horn-loaded speaker. The tweeter is surrounded by something called Tractrix horns. This actually makes the tweeter sound loud and lovely. Also, this waveguide helps with good imaging and soundstage.

The Linear Travel Suspension on the tweeter reduces distortion and produces clean and detailed sound. There is also a vented tweeter housing available which reduces the standing waves under the tweeter and therefore increases its fidelity. Overall, it sounds sweet.

Specifications
Enclosure type2-way bass-reflex speaker
Impedance
Frequency response (±3dB)45-25kHz
Frequency extension (-6dB)
Sensitivity (2.83V/1m)96dB 
Recommended power100 watts continuous max and 400 watts peak max
Bass driver6.5 inches
Mid Driver
Treble driver1-inch Titanium tweeters
Weight7.3 kg
Pros
  • Efficient speakers
  • Powerful bass
  • Sweet treble
  • Dynamically very good
  • Looks cool
  • Easy to drive
Cons
  • Nothing in the price range.
Check the price on Amazon

Wharfedale – Denton 80th

Wharfedale is one of the oldest companies around making loudspeakers. Denton is an old gen classic loudspeaker. It has been brought back to life as the 80th anniversary of Wharfedale loudspeaker company.

Build quality

The speaker is handcrafted with veneered mahogany. Hence the build quality is very good. It weighs 7.9 kilograms. It has a height of 320 mm and a width of 200 mm. The depth is 275 mm. On a whole, it makes a loudspeaker with a solid build.

It uses a 2-way bass-reflex design. It has a woofer and a tweeter. The woofer is a 5-inch Woven Kevlar bass cone. It is light yet stiff. Hence it can produce good bass. More on this later. The Tweeter is a 5-inch module. The speaker is not A/V shielded.

It comes in only one finish. That is  Mahogany Red Veneer. There is a grille as well and the grill is made of grey tungsten cloth and it gives a classic look to this speaker. The speaker has rubber feet.

Sound quality

The Denton is known for its sound quality and the company retains it in the new iteration. It not only looks classic but sounds classic too. The sound signature is warm in nature. 

The bass is low and tight for a 5-inch woofer. The woofer is a long-throw woofer and hence it achieved this feat. The quality of the bass is also nice. It hits a bass extension of 44Hz on the +/- 3db scale. The bass is powerful overall.

The mid is very musical and lovely in this speaker. The sound is laid back and perfectly goes with classical songs and classical music. The crossover frequency is set at 2.3kHz. Hence the bass driver has an impact on the mid-quality

The highs are beautiful and controlled. It is in no way muffled but has a warm sound. You can listen to this speaker for hours long without any fatigue.

It is one of the interesting speakers around. The frequency response of this speaker is 44Hz – 24kHz. The sensitivity is just 86dB. The nominal impedance is 6Ω. Although the stated amplifier power needed is 20-100 W, it needs a powerful amplifier way beyond 20 watts to unleash all the potential this speaker has to offer. Therefore it is one of the best bookshelf speakers for under $750

Specifications
Enclosure type2-way bass-reflex speaker
Impedance
Frequency response (±3dB)44Hz – 24kHz
Frequency extension (-6dB)
Sensitivity (2.83V/1m)86dB 
Recommended power20-100 watts
Bass driver5 inches Woven Kevlar bass cone
Mid Driver
Treble driver1 inch High frequency textile dome
Weight7.9 kg
Pros
  • Sweet sound
  • Warm sound
  • Fatigue free sound
  • Good bass
  • Classic looks
Cons
  • Wish it is more sensitive.
Check the price on Amazon

Dali Oberon 1

Dali stands for Danish audiophile loudspeaker industries. Going by their name, they make audiophile loudspeakers. Oberon is one of their premium line of speakers. Obviously, it will sound great.

Build quality

The build quality is great. They make great loudspeakers. It is one of the smallest speakers Dali makes. Hence the weight of this speaker is only 4.2 Kgs. It looks great. With an oversized tweeter and wood fiber cone, it not only looks cool but also sounds great. The speaker looks contemporary.

It comes in a variety of colors. They are

  • Black ash
  • Light Oak
  • Dark walnut
  • White

All the colors look splendidly beautiful. You can choose the one that goes well with your room decor. The small size of the speaker goes well with classic and modern interiors.

Sound Quality

What can be expected from an audiophile company making loudspeakers? The fantastic sound quality. The Frequency range of this Dali Oberon 1 is 51 – 26,000. It is very good for a small bookshelf speaker. The sensitivity is 86 dB and the nominal impedance is 6 ohms. Hence you would need a sound amplifier to power it well. The recommended amplifier power is 25 – 100 watts. With an amplifier pushing above 50 watts, the speaker will be happy to bop along. 

The crossover frequency is set at 2,800 Hz. It is a bit higher for an oversized tweeter but it does the job very well.

The woofer is a 5.25-inch driver. The driver is made of paper pulp infused with a wood fiber cone. This makes the cone rigid and extremely lightweight. Also, the surround is very soft and the spider suspension in this speaker is very light. This makes the speaker produce the micro details efficiently.

It not only produces good details but also decent bass. This speaker uses SMC on the woofer. This reduces the mechanical distortion caused by hysteresis and eddy’s current. Hence it can produce better sound quality than competing speakers and fatigue-free listening that you can listen to it for hours.

The tweeter is an oversized 29 mm ultra-light soft dome one. Being an oversized tweeter, it can produce a higher volume of sound with much precision and less travel of the membrane. The ultra-light soft dome tweeters are half the weight of other tweeters in the market. This makes the sound not only better but also the sound handed over by the crossover will be brilliantly taken by the tweeter and reproduced with good clarity. The tweeter surrounds are made carefully for wider dispersion and low coloration. Hence, this Dali Opticon 1 is one of the best bookshelf speakers for under $750

Specifications
Enclosure type2-way bass-reflex speaker
Impedance
Frequency response (±3dB)51 – 26,000 Hz
Frequency extension (-6dB)
Sensitivity (2.83V/1m)86dB 
Recommended power25-100 watts
Bass driver5.25 inch Wood Fibre Cone
Mid Driver
Treble driver29 mm soft textile dome
Weight4.2 kg
Pros
  • Woodgrain woofer
  • Sound quality
  • Oversized tweeter
  • Great detail retrieval
  • Looks good
Cons
  • Nothing in the price range.
Check the price on Amazon

Conclusion

All the above loudspeakers are the best in their class in their own unique way. Hence choosing the loudspeaker has to be based on the features available and what matters to you, personally. If you want a speaker with wide dispersion and great imaging, you should go with Kef Q350 or the Elac UB 52 Uni-fi speakers. If sound quality is your forte, you can go with the Q acoustics concept, Dynaudio M10, or Dali Opticon 1. If you want a good slam and easy-to-drive speaker then Klipsch RP-600 M is your speaker. If you’re behind classic warm sound Waferdale Denton 80th anniversary edition is the speaker for you. Thanks for reading.

Vignesh sathiaraj

Aju Vignesh Sathiaraj Padma is a mechanical and audio engineer. He is a person who loves technology and things. He is also an audiophile and loves to listen to audio gears. He is an avid writer and loves to blog.

Leave a Reply

Your email address will not be published. Required fields are marked *