Skip to content

How to connect jbl earbuds to iPhone (Step-By-Step Guide)

For a new user, it is sometimes hard to pair your JBL earbuds with your iPhone. We will teach you how to connect JBL earbuds to iPhone. Let’s go through the steps one by one.

How to connect jbl earbuds to iPhone
Photo by Dario Fernandez Ruz: https://www.pexels.com/photo/a-person-holding-wireless-earphones-and-a-smartphone-9130508/

How to pair JBL earbuds to your iPhone

Most Bluetooth JBL devices work this way to connect to your Bluetooth devices.

How to pair JBL earbuds to your iPhone easily. Please follow the steps below

Total Time: 2 minutes

Initial step

Make sure the earbuds are sufficiently charged.

Bluetooth settings

Open your iPhone, go to settings, go to the Bluetooth settings and enable Bluetooth from the Bluetooth menu.

Bluetooth setting cont..

You can also go into Bluetooth settings by swiping down from the top right of your iPhone screen, long pressing on the cluster with the Bluetooth icon, then long-pressing the Bluetooth icon and now clicking ‘Bluetooth settings…’ This opens the Bluetooth menu.

Open the case

Now Open the case of your JBL device.

Initiating pairing mode

Take one of the earbuds outside. Some TWS goes to pairing mode just by opening the case.

Detecting the device

Now you can find JBL earbuds with their model name under ‘Other devices.’

Pairing

Click on the device name. You should see ‘Connected’ on the Phone. You might also hear a voice alert on the TWS saying the TWS has been connected.

Success

Now your JBL device has been successfully paired to your device.

The end

You can now take out the other earbud, too, and it will be paired with the iPhone automatically.

Supply:

  • JBL Bluetooth earbuds

This is the method to pair JBL earbuds.

Should I pair every time I turn on my JBL TWS?

No, you don’t have to pair JBL earbuds or, for that matter, any Bluetooth device again. The iPhone will remember the last paired device, and it will connect to the Bluetooth device on its own whenever you open the case.

How to turn on the pairing mode on JBL TWS Earbuds?

In case you cannot enter into pairing mode even if you have opened the case and taken out the earbuds, there is another way around to pair JBL earbuds. If there is no Bluetooth button, then,

  1. Place the earbuds in your ear.

  2. Tap the touch-sensitive button on the side of the earbuds and hold it for 5 seconds.

  3. Your JBL TWS will enter into pairing mode.

If you have bluetooth button, try pressing and holding it for 5 seconds.

What to do even if the Pairing process fails?

The only way out is to reset the JBL earbuds and try the ‘pair JBL’ process.

How to reset your JBL Earbuds?

To reset the JBL earbuds, follow the guide below

  1. Open the case and take out the earbuds

  2. Wear the earphones in your ear perhaps without hurting.

  3. Now, identify the multifunction button on both earbuds and tap on them twice and immediately touch and hold for 5 seconds. You would have reset your JBL earbuds.

  4. You need to do the pairing process as said above.

How To Fix Headphones Not Appearing On Bluetooth Devices List

If you cannot find the JBL device in the Bluetooth device, you need to reset the Bluetooth device.

To reset the JBL earbuds, follow the guide below

  1. Open the case and take out both earbuds and wear it.

  2. Identify the multifunction button on both earbuds, tap on them twice and immediately touch and hold for 5 seconds.

  3. You should have reset your JBL earbuds by now.

  4. You have to do the pairing process once again by following the guide above.

How To Connect the Jbl Earbud TWS To Ipad

You can easily connect your JBL earbud to your iPad. iPad is essentially a bigger version of the iPhone as it too runs iOS. You can blindly follow the above-mentioned steps to pair your JBL Bluetooth devices or JBL headphones to your iPad.

Conclusion

We have seen how to connect jbl earbuds to iPhones. We have also seen how to enter pairing mode and how to hard reset a JBL TWS device. It is quite easy to do. Hopefully, following the guide will fix the issue. If not, please contact JBL for further assistance, as further troubleshooting has to be done best by the manufacturer themselves.

FAQs – Frequently Asked Questions

How do I reset my JBL wireless earbuds?

You can reset your JBL earbuds by following the guide I have written above.

Why Won’t My Jbl Earbuds Connect To My iPhone?

Check if your JBL Earbuds are already paired or if similar earbuds with the same name are paired on your device. In this case, you need to delete the paired device and re-do the pairing. If this didn’t work or no JBL earbuds were paired previously, you can reset your JBL earbuds and try the pairing mode and pair them again.

Are JBL wireless earbuds compatible with iPhones?

Yes, JBL wireless earbuds are compatible with iPhone.

How to put JBL earbuds in pairing mode?

You can easily put the JBL earbuds into pairing mode by opening the case and taking out one of the earbuds. Or, You can tap the button on either the right or left side of the earbuds and hold it for 5 seconds. Pairing mode will be activated.

Thanks for reading

Leave a Reply

Your email address will not be published. Required fields are marked *